How to Remove Fender Flares From a Chevy
- 1). Loosen and remove the screws which attach the fender flare to the Chevrolet's inner fender lip. Depending on the vehicle, there will be between four and five screws to be removed. Remove the additional two screws at the very bottom of the fender flare which attach the flare to the underside of the truck or sport utility vehicle.
- 2). Cut a length of mono-filament fishing line approximately two feet long. Slip this between the fender and the fender flare, and with a sawing motion, work the fishing line into the foam double-sided tape that secures the fender flare to the body of the truck. Continue to cut away the foam tape until the fender flare is loose, then set it aside.
- 3). Moisten the remaining adhesive tape which remains on the truck fender using the adhesive remover, and allow it to soak for a few moments. Use the plastic scraper to gently work away the adhesive until all of the foam has been removed from the fender.
- 4). Moisten the rag with some adhesive remover, then rub the traces of adhesive that have been left behind after using the scraper. If you intend to reinstall the fender flare, the old adhesive tape will have to be removed from the fender flare, as well.