How to Remove a Stuck Socket Or Wrench
Socket Stuck on the Bolt
- 1). Thread the bolt back into the hole two or three times if the bolt had already been removed. Three to four threads into the hole prevents the hole from being damaged as you remove the socket from the head of the bolt.
- 2). Firmly grasp the ratchet handle with your hand. If possible, hold the bolt steady with your other hand.
- 3). Lift the back end of the ratchet up and then push it down. Repeat this as you "walk" the socket off the bolt head.
Wrench Stuck on the Bolt
- 1). Place the wrench into a vice and tighten it so the threaded portion of the bolt faces down.
- 2). Place a smaller bolt or screwdriver on the head of the bolt.
- 3). Strike the smaller bolt or screwdriver with a mallet or hammer until the bolt breaks free from the wrench.
Wrench Stuck on the Bolt While the Bolt is in the Hole
- 1). Grasp the end of the wrench not stuck on the bolt head.
- 2). Pull up on the wrench and then push down on the wrench to "walk" the wrench off the bolt head.
- 3). Strike the bottom of the wrench with a mallet or hammer. Strike the wrench as close to the bolt head as possible to ensure the wrench moves upward and off the bolt as you strike it.